How to load receipt paper on a Hantle 1700W ATM

Here is a photo of the decal on the inside of the ATM detailing receipt paper loading instructions. ATM receipt paper is thermal and must be installed correctly or receipts will be blank. 

Be sure to load the paper onto the spindle with the correct feed direction.

Paper should be coated side out.

Install the paper roll so the paper falls from the top of the roll toward the front of the ATM and falls downward. Pull the paper beneath the roll and over then under the tension shaft. 

Guide the paper into the feeder where the mechanism will, ‘grab’ the paper and pull it toward the exit. 

Voila! You’ve done it!